Table of Contents
Advertisement
Set the Time
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :SYSTEM:, and then press
the OPEN key to enter the :SYSTEM:
menu.
3
Highlight :DATE & TIME:, and then
press the OPEN key to enter the
:DATE & TIME: menu.
4
Highlight TIME, and then press the
OPEN key to enter.
5
Move the joystick left/right to select
hour, minute or second, and up/down
to set the time.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Note
The internal clock may become up to a
minute fast or late each month. Adjust the
accurate time regularly.
PASSWORD
Main menu → :SYSTEM: menu
→ :PASSWORD: menu
44
SYSTEM
When you want to restrict access to menu
indication, set the password. The password
can be registered up to 20 characters, and is
available in alpha numeric and space.
Set the Password
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :SYSTEM:, and then press
the OPEN key to enter the :SYSTEM:
menu.
3
Highlight :PASSWORD:, and then
press the OPEN key to enter.
4
Highlight PASSWORD ENABLE,
press the OPEN to enter and move the
joystick up/down to select ON or OFF.
5
If ON is selected, enter the password.
Press the OPEN key to enter the
PASSWORD menu.
6
Move the joystick up/down/left/right
to set the password.
7
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
ALARM IN
There are a set of alarm ports under the
camera including 4 alarm inputs.
Set the direction of the detected input signal
to each alarm input terminal of the camera.
MAKE: Detects the alarm when the alarm
input is short-circuited.
BREAK: Detects the alarm when the alarm
input is open-circuited.
Advertisement
Table of Contents
