Connections And Setup; Connecting The Power Source; Connecting The I/O Cable - Sony DynaView SSC-CR441 Operating Instructions Manual

Connections and
Setup
Connecting the Power
Source
I/O connector
(supplied)
To I/O
devices
Connecting to a 24 V AC
Power Source Supply
Connect the 24 V AC power supply system
to the power input terminal of the camera.
• Use a 24 V AC power source isolated
commercial power supply.
• The usable voltage range is as follows:
24 V AC: 21.6 to 26.4 V
• Use a UL cable (VW-1 style 10368) for
24 V AC connection.
24 V AC
connector
(supplied)
To 24 V BNC cable
AC power To monitor
supply
Recommended Power Cable
24 V AC
Cable(AWG)
#24
Maximum
cable length 11
(m)

Connecting the I/O Cable

Wiring Diagram for Alarm
Input
Mechanical switch/open collector
output device
Camera inside
3.3 V
10 kohms
2.2 kohms
10 kohms
10 kohms
GND GND GND

Connections and Setup

#22 #20
19 28
Outside
4, 5, 6 or 7 pin
(Alarm Input
1, 2, 3 or 4)
Mechanical
switch
8 pin
GND
or
Open collector
output device
17