English - Oral-B 3731 Smart Manual

English

Your Oral-B Professional Care SmartSeries 5000
with SmartGuide uses an interactive wireless
display to help you optimize your brushing
experience.
Important
• To avoid electromagnetic interference and/or
compatibility conflicts, deactivate the radio
transmission of your toothbrush before
carrying or using it in restricted surroundings,
such as aircrafts or specially marked areas in
hospitals (see «Deactivating the radio trans-
mission»).
• Persons with pacemakers should always
keep the toothbrush more than six inches
(15 centimeters) from the pacemaker when
turned on. If at any time you suspect inter-
ference is taking place, deactivate the radio
transmission of your toothbrush before using
it (see «Deactivating the radio transmission»).
Description
a Brush head (depending on model)
b On/off button
c Brushing mode button
d Handle
e Handle display
f SmartPlug charger (includes charging ring
and SmartPlug)
g Base plate
h Protective cover
i SmartGuide display unit
j Wall mount
k Adhesive tape
First use
Before brushing for the first time, charge your
toothbrush. Plug the SmartPlug into an electrical
outlet and place the handle (d) on the charging
ring (f), (see «Connecting and charging»).
• Your SmartGuide display comes with a
demonstration mode activated (not in models
purchased through your Dental Professional).
To leave this mode, please remove the
compartment cover on the back and push the
«set» or the «h/min» button, located in the
battery compartment. Please note that your
SmartGuide display will self-activate this
demonstration mode when you do not use
your toothbrush for 28 days. You can avoid
this self-activation by setting the clock or
synchronizing your handle.
h /m in h /m in
s e t s e t
2 2
1 1
• A flashing «12:00» on the SmartGuide display
indicates that time can be adjusted. Press the
«set» button until «12h» is displayed.
• By briefly pressing the «h/min» button, you
can toggle between a «12h» or «24h» daytime
format. Push the «set» button to confirm your
choice.
h/min h/min
• Then the hour digit starts flashing. Press the
«h/min» button until the right hour appears
and confirm with the «set» button. Proceed
the same way to set both minute digits. If you
prefer not using this clock feature, the flashing
«12:00» will disappear automatically after 24h.
h/min h/min
You can start your toothbrush by pressing the
on/off button (b). To avoid splashing, guide the
brush head to your teeth before switching on
the appliance.
h /m in h /m in
s e t s e t
h/min h/min
5