Maintenance - Sharp AY-AP9NRH Operation Manual

MAINTENANCE

Be sure to stop the operation, disconnect
the power cord from the wall outlet and turn
off the circuit breaker before performing
any maintenance.
CLEANING THE FILTERS
The filters should be cleaned every two weeks.
1
Turn off the unit.
2
Remove the filters.
1 Lift the open panel.
2 Pull the air filters down to remove them.
3
Clean the filters.
Use a vacuum cleaner to remove dust. If
the filters are dirty, wash them with warm
water and a mild detergent. Dry filters in
the shade before reinstalling.
4
Reinstall the filters.
1 Reinstall the filters in the original posi-
tions.
2 Close the open panel.
OM_AY-AP9NRH_EN.indd Sec1:11 OM_AY-AP9NRH_EN.indd Sec1:11
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them.
It can cause electric shock or equipment dam-
age.
• Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the COOL mode,
temperature setting 32˚C, to thor-
oughly dry inside the unit.
2
Stop the operation and unplug the unit.
Turn off the circuit breaker, if you have
one exclusively for the air conditioner.
3
Clean the filters, then reinstall them.
MAINTENANCE BEFORE AIR
CONDITIONER SEASON
1
Make sure that the air filters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
EN-11
4/17/12 12:54:17 PM 4/17/12 12:54:17 PM