Maintenance - Sharp AH-XP10 B Series Operation Manual

MAINTENANCE

Be sure to disconnect the power cord from
the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the filters.
Lift the open panel.
Pull the air filters down to remove them.
3
Clean the filters.
• U se a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water
and a mild detergent. Dry filters in the shade
before reinstalling.
4
Reinstall the filters and close the
open panel.
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It
can cause electrical shock or equipment damage.
• Do not use hot water, thinner, abrasive powders
or strong solvents.
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Dry the inside of the indoor unit thor-
oughly by taking the following steps.
• R un the unit in the SELF CLEAN operation mode.
2
Stop the operation and unplug the
unit.
• T urn off the circuit breaker, if you have one
exclusively for the air conditioner.
3
Clean the filters, then reinstall them.
MAINTENANCE BEFORE AIR CONDI-
TIONER SEASON
1
Make sure that the air filters are not
dirty.
2
Make sure that nothing obstructs the
air inlet or outlet.
EN-13 EN-13