Maintenance - Sharp AH-XP10YH Series Operation Manual

MAINTENANCE

Be sure to disconnect the power cord
from the wall outlet or turn off the
circuit breaker before performing any
maintenance.
CLEANING THE AIR FILTER
1
Turn off the unit.
2
Remove the air filter.
Insert finger into handles to lift the
air filter up.
Handles
3
Clean the air filter.
Use a vacuum cleaner to remove
dust. If the air filter is dirty, wash it
with warm water and a mild de-
tergent. Dry air filter in the shade
before reinstalling.
4
Reinstall the air filter.
Hold the air filter and insert the
hooks into the holes until match
each other.
Hook
Hole
OM B088 EN+TH+VN+CS.indb 14
Press the air filter down until it
clicks.
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour wa-
ter on them. It can cause electrical
shock or equipment damage.
Air filter
• Do not use hot water, thinner, abra-
sive powders or strong solvents.
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Dry the inside of the indoor unit
thoroughly.
Run the unit in the SELF CLEAN
operation mode.
2
Stop the operation and unplug
the unit.
Turn off the circuit breaker, if you
have one exclusively for the air
conditioner.
3
Clean the air filter, then reinstall
it.
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
Make sure that the air filter is
not dirty.
2
Make sure that nothing ob-
structs the air inlet or outlet.
EN-14
2022/6/21 13:16:26