Optional Component Installation; Esd Precautions - Fujitsu Sparc Enterprise T5120 Installation Manual

Workstation
■
Terminal server
■
Patch panel connected to a terminal server
■
Related Information
"Optional Component Installation" on page 5
■

Optional Component Installation

The standard components of the server are installed at the factory. However, if you
ordered options such as additional memory or PCI cards, these options will be
shipped separately. If possible, install these components prior to installing the server
in a rack.
If you ordered any options that are not factory-installed, see the SPARC Enterprise
T5120 and T5220 Servers Service Manual for installation instructions.
Note – The list of optional components can be updated without notice. See the
product web pages for the most current list of components supported in the server.
Related Information
SPARC Enterprise T5120 and T5220 Servers Getting Started Guide
■
SPARC Enterprise T5120 and T5220 Servers Getting Started Guide (DC)
■
SPARC Enterprise T5120 and T5220 Servers Service Manual
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wriststrap, footstrap, or equivalent safety equipment to prevent
electrostatic damage (ESD) when you install or service the servers.
Preparing for Installation 5