Specifications; Safety Instructions - Makita MLT100 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blade body thickness
Max. cutting capacities
No load speed (min
Table size (L x W)
Dimensions (L x W x H) with table(s) not extended
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Wear safety glasses.
･
Do not place hand or fingers close to
the blade.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting in wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Model
Arbor hole
Blade diameter
90°
45°
-1
)
Net weight
Safety class
of the
on Waste Electric
Equipment
environmentally
END215-6

SAFETY INSTRUCTIONS

WARNING! When using electric tools, basic safety
precautions, including the following, should always
be followed to reduce the risk of fire, electric shock
and personal injury. Read all these instructions
before operating this product and save these
instructions.
For safe operations:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
European area well lit. Do not use power tools where there is
and risk to cause fire or explosion.
and its 3. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away.
Do not let visitors touch the tool or extension cord.
compatible All visitors should be kept away from work area.
5. Store idle tools.
ENE003-1
When not in use, tools should be stored in a dry,
high or locked up place, out of reach of children.
6. Do not force the tool.
ENF002-2
It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool.
Do not force small tools or attachments to do the
job of a heavy duty tool. Do not use tools for
purposes not intended; for example, do not use
circular saws to cut tree limbs or logs.
2
MLT100
25.4 mm
255 mm
1.9 mm or less
90.5 mm
63 mm
4,300
(685 mm - 835 mm) x (955 mm - 1,305 mm)
with sub tables (R) and (back)
1,130 mm x 984 mm x 333 mm
with sub tables (R) and (back)
34.1 kg
/II
ENA001-2