Join A Network Using Wps; Join A Network Using Netgear Genie - NETGEAR A6100 User Manual

Join a Network Using WPS

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to
a home network while maintaining security. Before you use the WPS method to join a
network, make sure that your router or access point supports WPS.
Note: If the security type on your router or access point is set to WEP, you
cannot use WPS to connect the mini adapter to the network.
To use WPS to join a wireless network:

1. Insert the adapter into a USB port on your computer.
2. Press and hold the WPS button on the mini adapter for two seconds.
The WPS LED blinks.
3. Within two minutes, press the WPS button on your wireless router or access point.
The mini adapter joins the network, which can take a few minutes. Your settings are
saved in a profile.
Note: After the mini adapter joins the network, it automatically saves the
network connection information to a Windows profile. Windows
profiles can be used by genie and the Windows utility. If the network
information does not change, the next time you launch NETGEAR
genie, it automatically connects to the network you previously
joined.

Join a Network Using NETGEAR genie

You can use the mini adapter's NETGEAR genie to join a network.
A6100 WiFi USB Mini Adapter
WPS
button
Getting Started
11