NETGEAR A6200 Installation Manual

®
A6200 WiFi USB Adapter
802.11ac Dual Band

Package Contents

A6200
WiFi Adapter
and Desktop Dock
Installation
Installation Guide
1. Insert the resource CD in your computer CD drive. If the CD main screen does
not display, browse the files on the CD and double-click autorun.exe.
2. Click Setup.
The Software Update Check screen displays.
3. If you are connected to the Internet, click Check for Updates. If not, then click
Install from CD.
4. Click I agree to accept the license agreement and then click Next.
A message displays asking you to
wait while software is installed. After
a few minutes, NETGEAR genie
prompts you to insert your adapter.
Resource
CD
5. You can use the adapter with or
without the desktop dock:
• To use the adapter with the
desktop dock, place the wireless
adapter into the dock and connect
the USB cable to the USB port on
your computer.
• To use the adapter without the
desktop dock, insert the adapter
into a USB port on your computer,
as shown on the right.
6. Click Next.
NETGEAR genie displays a list of wireless networks in your area.
Standalone Driver Installation
1. Insert the resource CD in your computer CD drive. If the CD main screen does
not display, browse the files on the CD and double-click autorun.exe.
2. Click Install Windows Standalone
Driver.
The driver installs on your computer.
3. When prompted, either insert the adapter
into a USB port on your computer, or
connect it with the USB cable that came
in the package.