NETGEAR DG834GSP Reference Manual page 176

Reference Manual for the ADSL Modem Wireless Router DG834GSP
10.5.6.0/24
Gateway A
LAN IP
10.5.6.1
DG834G
Figure B-1
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/DG834GSP.asp.
Step-By-Step Configuration
1. Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard
(see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
Unit
DG834G
FVL328
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
c. In Step 3, enter the following:
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
B-2
VPNC Example
Network Interface Addressing
14.15.16.17 22.23.24.25
WAN IP WAN IP
WAN IP
14.15.16.17
22.13.24.25
v1.0, June 2007
Gateway B
FVL328
LAN IP
10.5.6.1
172.23.9.1
NETGEAR VPN Configuration
172.23.9.0/24
LAN IP
172.23.9.1
8-21), being certain
LAN Subnet Mask
255.255.255.0
255.255.255.0