Replacing The Freezer Door - Baumatic TITAN4 Instruction Manual

IMPORTANT: The door should be lent carefully against a wall,
so that the inner or outer surfaces cannot be accidentally
damaged.

Replacing the freezer door

5) Push down the left hand collar of the coupling and then insert the
water tube as far as it will go into the coupling. When it is securely in
position, release the left hand collar.
1) Firstly insert the water tube into the hole
in the bottom hinge and then insert the
bottom of the freezer door into the bottom
hinge too. Make sure that the hinge pin has
been inserted into the hole in the bottom of
the freezer door.
2) Insert the back of the top hinge in the
groove on the top of the cabinet. Close the
door fully against the cabinet, and then
make sure that the top hinge pin is fitted
securely into the hole on top of the freezer
door.
3) Reconnect the harness wires and then turn
the hinge fastener clockwise. IMPORTANT:
You should make sure that the hinge fastener
is securely tightened as far as it will go.
4) Place the top hinge cover back into
position and using
tighten it to the top of the cabinet.
a screwdriver, fully
32