Maintenance
Maintenance
Battery removal/disposal
The TruVision NVR 40 contains one 3V CR2032 lithium battery. Use the recommended
replacement batteries or contact technical support for information.
WARNING:
Make sure that the unit is turned off before proceeding. There is a risk of explosion, if
the battery is replaced by an incorrect type.
1. Turn off the unit's power switch and unplug the power supply cable from its
power source.
2. Turn off all accessories connected to the unit.
3. Remove the cover from the TruVision NVR 40 unit.
4. Remove the battery from its socket. See Figure 22.
5. Install a new battery into this socket.
Figure 22: Removing the battery
Note:
For proper recycling, dispose of all batteries as required by local ordinances or
regulations.
TruVision NVR 40 User Manual
29