Table of Contents
Advertisement
Figure 6: NVR 40 handles and screws for rack mount
Rack-mounting the unit
1. Two handles for 19' rack mounting are included with the unit.
2. Carefully align the unit with the rack and slide it into position, and then fix the unit
to the rack with the screws provided. See Figure 6, item 1.
WARNING:
To prevent injury, grasp the unit underneath the lower edge, and lift with
both hands. To prevent injury, keep your back straight and lift with your legs, not your
back.
Connecting the power supply
1. Connect the power cable to the power supply input, which is situated on the front
of the unit. See Figure 9 en page 16.
2. Connect the opposite end of the power cable to an appropriate power source. The
input power to the chassis is self-sensing and should be 110 ~ 230 V @ 50 ~ 60
Hz.
Note:
he socket-outlet should be installed near the unit and must be easily
T
accessible.
TruVision NVR 40 User Manual
Hardware installation
13
Advertisement
Table of Contents
