Table of Contents
Advertisement
Hardware installation
Hardware installation
The TruVision NVR 40 Network Video Recorder comes with all applicable parts
installed. The hardware installation procedure consists of mounting the unit in an
appropriate 19' rack.
Packing contents
The following items should be included in the package:
• One TruVision NVR 40 unit
• One box with handles and screws
• Two power cords (one for use in EU and the other one in North America)
• One CD with TruVision NVR 40 user manuals
• One CD with GE-NAV 3.0 application software
• One quick start guide
Installation procedure
Caution:
Make sure that the unit is turned off before proceeding.
Installing handles
1. Lift the unit safely out of the packing container.
As you unpack the unit, check for signs of shipping damage (damaged box,
scratches, dents, etc.). If the unit is damaged or fails to meet specifications, notify
the VisioWave support department or your local representative immediately. Also
notify the carrier. Retain the shipping cartoon and packing material for inspection
by the carrier.
2. Ensure the power service at the site is suitable for the unit you are installing.
3. Check the packing slip to ensure that all the proper components are present.
4. Open the accessories box. There are two handles and eight screws per unit.
5. Screw the handles to the chassis. There are four screws per handle. See Figure 6,
item 2.
12
TruVision NVR 40 User Manual
Advertisement
Table of Contents
