Table of Contents
Advertisement
Starting and configuring the TruVision NVR 40
2. Access the device configuration window, by selecting Administration from the
main menu and then Network Configuration icon. See Figure 16.
3. Select the Adapter name.
4. Select the mandatory options for network configuration:
DHCP or Static IP
• To set DHCP, select the DHCP Auto Configuration of IP Address box.
DHCP is NOT set as default
• To set static IP address, fill in the available fields: IP Address, Network Mask,
Broadcast Address, and Gateway Address.
5. Click the Apply button at the bottom of the window, to confirm the configuration.
Manually set system date and time
To manually set system date and time, enter required data in the fields below:
• Enter new date (mm/dd/yyyy)
• Enter new time (hh.mm.ss)
• Select local zone
• Enter NTP server address
Figure 17: Set system date and time window
24
TruVision NVR 40 User Manual
Advertisement
Table of Contents
