Table of Contents
Advertisement
TruVision NVR 40 unit overview
There are also three LEDs to monitor the status of the main functions of the unit. See
section Figure 10 on page 16 for more LED details.
The unit has one handle on each side of the front panel to facilitate operations. These
handles need to be installed. See section "Installing handles" on page 12.
These two mounting handles on each side of the unit also make it possible to rack-
mount the chassis. See section "Rack-mounting the " on page 13.
TruVision NVR 40 rear panel
The rear panel of the TruVision NVR 40 only contains the fans and has no connectors.
This design is user-friendly, because equipment is rack-mounted and therefore
difficult to reach from the rear panel.
Moreover, the cooling fans can directly pump air up through the rear panel that is
covered by protective foam and expel the air via the front panel.
Figure 3: TruVision NVR 40 rear panel
See "Replacing fans" on page 30 for more information on replacing fans.
TruVision NVR 40 User Manual
9
Advertisement
Table of Contents
