Step 8 Connect Electrical - GE ZET1038 Installation Instructions Manual

30" convection built-in ovens
Hide thumbs Also See for ZET1038:
Table of Contents

Advertisement

STEP 8 CONNECT ELECTRICAL

WARNING
ELECTRICAL SHOCK HAZARD
• Electrical ground is required on
this appliance.
• DO NOT connect to the electrical
supply until appliance is perma-
nently grounded.
• Disconnect power to the junction box before
making the electrical connection.
• This appliance must be connected to a grounded,
metallic, permanent wiring system or a grounding
connector should be connected to the grounding
terminal or wire lead on the appliance.
Failure to do so could result in fire, personal injury or
electrical shock.
3-Conductor Branch Circuit
Branch Circuit
Red
120V AC
White or
Gray
Neutral
Black
120V AC
When connecting to a 3-conductor branch
circuit:
• Connect oven red lead to branch circuit red lead.
• Connect oven black lead to branch circuit black
lead.
• Connect oven bare copper conductor and white lead
to branch circuit neutral lead (white or gray).
Installation Instructions
Oven
Red
Green
White
Black
13
AVERTISSEMENT
RISQUE DE CHOC
ÉLECTRIQUE
• Cet appareil doit être mis à la
terre.
• NE PAS brancher l'alimentation
électrique si l'appareil n'est pas
mis à la terre de façon permanente.
• Débrancher l'alimentation au boîtier de
raccordement avant de faire le branchement
électrique.
• Cet appareil doit être branché sur un circuit perma-
nent métallique à la terre ou un connecteur de mise
à la terre doit être branché à la borne de mise à la
terre ou un fil de l'appareil.
Il faut suivre ces instructions pour éviter des
incendies, des blessures graves ou la mort.
4-Conductor Branch Circuit
Branch Circuit
Red
120V AC
Black
120V AC
Bare or
Green
GND
White or
Gray
Neutral
When connecting to a 4-conductor branch
circuit:
• Connect oven red lead to branch circuit red lead.
• Connect oven black lead to branch circuit black
lead.
• Break connection between oven white lead and
oven bare copper conductor.
• Connect oven white lead to branch circuit neutral
lead (white or gray).
• Connect oven bare copper conductor to branch
circuit ground lead (green or bare copper).
Note: Use copper wire only.
Oven
Red
Black
Green
White

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zet1058Monogram zet1038Monogram zet1058

Table of Contents