Cisco Catalyst 4500 Series Command Reference Manual page 1168

Index
creating 2-501
marking
2-590
See also QoS, hierarchical policies
traffic classification
defining the class
defining trust states
port, dual-capable
selecting the connector
Port Aggregation Protocol
See PAgP
port-based authentication
displaying debug messages
displaying statistics and status
enabling 802.1X
2-214
host modes
2-207
manual control of authorization state
periodic re-authentication
enabling
2-217
re-authenticating 802.1X-enabled ports
switch-to-client frame-retransmission number
port channel
accessing
2-271
creating
2-271
displaying information
load distribution method
resetting to defaults
setting
2-503
port-channel standalone-disable command
port control, changing from unidirectional or
bidirectional 2-23
port-control value, configuring
port range
executing 2-272
port security
debugging ports security
deleting secure or specific addresses
displaying settings for an interface or switch
enabling 2-1000
filter source IP and MAC addresses
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
IN-14
2-1038
2-441
2-147
2-647
2-214
2-216
2-212
2-833
2-503
2-505
2-36
2-163
2-125
2-844
2-334
setting action upon security violation
setting the rate limit for bad packets
sticky port
2-1000
Port Trust Device
displaying 2-865
power efficient-ethernet auto command
power inline four-pair forced command
power inline logging global command
power negotiation through LLDP, enabling
power status
displaying inline power
displaying power status
power supply
configuring combined and redundant power on the
Catalyst 4507R
2-506
configuring inline power
configuring power consumption
displaying the SEEPROM
setting inline power state
PPPoE Discovery
enable vendor-tag stripping on packetsPPPoE Server
enable vendor-tag stripping on Discovery
packets 2-533
PPPoE Discovery packets, limit rate arriving on an
interfsce
2-531
PPPoE Intermediate Agent
clear statistics (packet counters)
debugging 2-164
pppoe intermediate-agent
enable intermediate agent on a switch
enable on an interface VLAN range
enable PPPoE Intermediate Agent on an
interface 2-524
enable vendor-tag stripping of Discovery
packets
2-533
format-type (global)
limit rate of PPPoE Discovery packets
set circuit-id or remote-id for an interface
set circuit-id or remote-id for an interface VLAN
range
2-530
2-1000
2-1000
2-511
2-516
2-518
2-381
2-851
2-851
2-512
2-506
2-669
2-510
2-127
2-523
2-526
2-527
2-531
2-529
OL-25342 -01