Spanning-Tree Mst Hello-Time - Cisco Catalyst 4500 Series Command Reference Manual

spanning-tree mst hello-time

spanning-tree mst hello-time
To set the hello-time delay timer for all the instances, use the spanning-tree mst hello-time command. To
return to the default settings, use the no form of this command.
Syntax Description
seconds
Defaults
The hello-time delay timer is set for 2 seconds.
Command Modes Global configuration mode
Command History Release
12.1(12c)EW
Usage Guidelines If you do not specify the hello-time value, the value is calculated from the network diameter.
Examples This example shows how to set the hello-time delay timer:
Switch(config)# spanning-tree mst hello-time 3
Switch(config)#
Related Commands Command
show spanning-tree mst
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-952
spanning-tree mst hello-time seconds
no spanning-tree mst hello-time
Number of seconds to set the hello-time delay timer for all the instances on the
Catalyst 4500 series switch; valid values are from 1 to 10 seconds.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays MST protocol information.
OL-25342 -01