Do Not Disturb; Call Recording; Call Blocking - Linksys SPA901 User Manual

To use speed dial entries:
Pick up the handset and press the number (2-9) corresponding to the desired entry, followed by the
•
( # ) key.

Do Not Disturb

•
Dial ( * ) ( 7 ) ( 8 ) to activate. You will hear a slow "stutter" dial tone as confirmation.
•
To disable, dial ( * ) ( 7 ) ( 9 ).

Call Recording

Any time during an incoming call, dial ( * ) ( 7 ).
•
You will hear: "Recording is now on." The caller will hear the same message.
•
To end Call Recording, dial ( * ) ( 7 ) again. You will hear: "Recording is now off."
•
Visit the Call Logs section of your account after the call has ended to review the recording.
•

Call Blocking

To block a caller from calling again (while on a conversation with them), dial ( * ) ( 9 ).
•
You will hear a confirmation message.
•
If you pressed ( * ) ( 9 ) by mistake, press it again to unblock the caller.
•
Upon disconnecting the call, that caller will not be able to call again.
•
Anonymous calls cannot be blocked. To block callers with hidden caller ID, refer to the Numbers
•
section in your account's Control Panel.
Linksys, Cisco Systems and the Linksys and Cisco Systems logos are registered trademarks of Cisco
Systems, Inc. in the United States and various countries. All other trademarks are the property of their
respective owners.