Table of Contents
Advertisement
6.4 List of Errors
Number
Description
ERR00
No errors
ERR11
An undefined command has been received.
ERR12
The parameter specification for the command is incorrect.
ERR13
A command has been received that cannot be executed because of the
status of the CA450.
ERR16
An error was detected during calibration.
ERR20
Error in the power supply for LOOP POWER measurement
ERR23
The output current or voltage has exceeded its limit.
ERR60
The saved setting data in the internal flash memory is not correct.
ERR61
The saved measurement calibration value data in the internal flash
memory is not correct.
ERR62
The saved output calibration value data in the internal flash memory is
not correct.
If error number 11, 12, or 13 occurs during communication, the error number appears
in the LCD main display.
When ERR13 appears
in the main display
72
Advertisement
Table of Contents
