Mac Users: Accessing Storage Through Ftp - Cisco Small Business NSS3000 Series Administration Manual

End User Access

Mac Users: Accessing Storage through FTP

STEP 3
STEP 4
STEP 5
Mac Users: Accessing Storage through FTP
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
Click Connect.
When the Login window appears, enter your username and password. If your user
profile is set up locally (that is, through the NSS configuration interface and not
through the ADS or NTv4 domain) and the NSS is joined to a domain, you need to
enter the following: <NSS hostname>\<user name>. If the NSS is not joined to a
domain, just enter the username.
Depending on your share privileges, you can begin using the NSS storage.
Mac users who have a user profile can access any shares to which they have
privileges on the NSS storage using FTP. However, they cannot rename folders
when using FTP to access the NSS storage. To rename a folder, use CIFS or NFS if
it is enabled on the share.
Before your end users can access the shares on the NSS using FTP, the NSS must
have FTP access enabled and the individual share must be set up to allow FTP
access.
To access the NSS storage using FTP:
Open your FTP client application.
Click Connect.
From your FTP client application, connect to the NSS. Enter the IP address or
hostname of the NSS. For more information about using your FTP client
application, refer to its documentation.
Enter your username and password when prompted by your FTP client.
When your FTP client has logged in, a list of accessible shares appears as
individual directories.
Depending on your share privileges, you can begin using the NSS storage.
8
77