Table of Contents
Advertisement
Using your thermostat.
Hold and Temporary Override
Figure 10: 'HOLD' Display
Day/Time Setting Mode
Figure 11: Changing Time and Date Display
6
Hold is the permanent bypass of program temperature
setpoints. Manual release is required to return to active
program mode.
Press HOLD/RETURN in NORMAL mode for hold. The current
setpoint temperature will be used. The HOLD icon will be
displayed and the program numbers will be cleared.
The HOLD temperature setpoint can be changed by following
the directions for changing the normal temperature in the
previous section.
To release the hold, press HOLD/RETURN again in NORMAL
mode to return to programmed operation. The HOLD icon
will disappear.
Temporary override is the temporary change of the setpoint
temperature until the next program time. Refer to the previous
section on changing temperature setpoints for information on
adjusting the temperature.
To release temporary override before the next setpoint comes,
press HOLD/RETURN twice in NORMAL mode (the first press will
change to hold and the second press will release the hold and
temporary override).
In NORMAL mode, press DAY/TIME to enter the DAY/TIME
SETTING mode. The LCD will be cleared except for the time and
day of week indicator.
When the hour is flashing, press
(decrease setting) to adjust hour.
Press DAY/TIME again. Minutes will be flashing. Press
adjust minutes.
Press DAY/TIME again. The day will be flashing. Press
adjust day.
Press DAY/TIME again. The thermostat will return to NORMAL
mode.
When adjusting the day or time, press and hold
2 seconds for fast advance. During fast advance, the data will
stop flashing.
At any time you may press the HOLD/RETURN button or wait 5
seconds to return to NORMAL mode.
The clock seconds will be reset to zero whenever time is
changed. The clock seconds will not be affected if only the
day is changed.
The time display will be frozen in DAY/TIME setting mode.
However, the internal clock is still running. If nothing is
changed, then the frozen time will be replaced by the internal
clock when you return back to the NORMAL mode.
(increase setting) or
or
to
or
to
or
for
Hide quick links:
Advertisement
Table of Contents
