Advertisement
Installing
or removing driver bit or drill bit
CAUTION
:
Always be sure that the tool is switched off and the battery cartridge
i s
removed before
installing or removing the bit.
Hold the ring and turn the sleeve counter-
clockwise to open the chuck jaws. Place
the
bit
in the chuck as far as it will go.
Hold the ring firmly and turn the sleeve
clockwise t o tighten the chuck.
To remove the bit, hold the ring and turn
the sleeve counterclockwise.
Sleeve
7
Switch action
Tool speed is increased by increasing pres-
Trigger switch
CAUTION
:
Before inserting the battery cartridge into the tool, always check to see that the trigger
switch actuates properly and returns t o the "OFF" position when released.
Overload protector
The overload protector automatically cuts
out t o break the circuit and the button
pops out, whenever heavy work is pro-
longed. Wait
20-30
seconds before press-
ing the restart button t o resume operation.
Your finger should not be on the trigger
when you press the restart button, how-
ever.
Advertisement
