Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1 . Do
n o t charge Battery Cartridge w h e n temperature i s BELOW 10°C
(5OOF)
2. Do
not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog t h e charger vents.
4.
Do
not short the
battery cartridge:
or ABOVE 4OoC (104OF).
receptacle.
(1)
Do
n o t t o u c h t h e terminals
with
any conductive material.
(2)
Avoid storing battery cartridge in a container
with
other metal objects such
(3) Do
not expose battery cartridge t o water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5.
Do
not store the t o o l and Battery Cartridge in locations where t h e tempera-
6. Do
not incinerate t h e Battery Cartridge even if
it
is severely damaged or is
ture may reach or exceed 5OoC (122OF).
completely w o r n out. The battery cartridge can explode
in
a fire.
ADDITIONAL SAFETY RULES
1. Be aware t h a t this tool is always in an operating condition, because
it
does
2.
Always be sure you have a f i r m footing.
3.
Hold the tool firmly.
4. Keep hands away f r o m rotating parts.
5. When drilling into walls, floors or wherever "live"
electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill i n t o a "live"
wire.
n o t have t o be plugged into an electrical outlet.
Be sure n o one is below w h e n using the tool
in
high locations.
6.
D o not leave the tool running. Operate the tool only w h e n hand-held.
7. Do
n o t t o u c h the
drill
b i t or t h e workpiece immediately after operation; they
may be extremely h o t and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Advertisement
