Advertisement
Installing Makita jig saw blade
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
Use the hex wrench to loosen the bolt,
With the blade teeth facing forward, insert
the blade into the blade holder
as
far
as
it will go.
Make sure that the back edge of the blade
fits into the roller and tighten the bolt
securely with the hex wrench.
CAUTION :
Use a lubricant or cutting oil between the blade and roller when cutting iron or composi-
tion board, etc. Failure to do so will shorten the service life of your blade and roller.
Advertisement
