Makita 4326 Instruction Manual
Hide thumbs
Also See for 4326:
- User manual ,
- Instruction manual (76 pages) ,
- Technical information (7 pages)
Related Manuals for Makita 4326
Summary of Contents for Makita 4326
- Page 1 INSTRUCTION MANUAL Jig Saw 4326 4327 4328 4329 4326M 4327M DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model 4326 4327 4328 4329 4326M 4327M Length of stroke 18 mm 18 mm 18 mm 18 mm 18 mm 18 mm Blade type B type Makita type Max. cutting capacities Wood 65 mm 65 mm 65 mm 65 mm... - Page 3 If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Use of power supply via an RCD with a rated residual current of 30 mA or less is always recommended.
-
Page 4: Jig Saw Safety Warnings
Service FUNCTIONAL Have your power tool serviced by a qualified repair person using only identical replacement DESCRIPTION parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and chang- CAUTION: ing accessories. • Always be sure that the tool is switched off and unplugged before adjusting or checking function Jig saw safety warnings... - Page 5 B type blades causes insufficient tightening of faster but the service life of the blade will be reduced. the blade, resulting in a serious personal injury. (For models 4326/4327/4328/4329) • Use only Makita type blades. Using blades other than Makita type blades causes insufficient tightening of the blade, resulting in a serious personal injury. (For models 4326M/4327M) 5 ENGLISH...
-
Page 6: Dust Cover
To install the blade, loosen the bolt counterclockwise on Adjusting roller (For models the blade holder with the hex wrench. 4326/4326M/4327/4327M) With the blade teeth facing forward, insert the blade into the blade holder as far as it will go. Make sure that the back edge of the blade fits into the roller. Then tighten... -
Page 7: Operation
With the base tilted, you can make bevel cuts at any OPERATION angle between 0° and 45° (left or right). Loosen the bolt on the back of the base with the hex wrench. Move the base so that the bolt is positioned in CAUTION: the center of the cross-shaped slot in the base. -
Page 8: Metal Cutting
Clean cutting operations can be performed by connect- Tilt the tool up on the front edge of the base ing this tool to a Makita vacuum cleaner. Insert the hose with the blade point positioned just above the of the vacuum cleaner into the hole at the rear of the workpiece surface. - Page 9 Rip fence (optional accessory) Aluminum base type CAUTION: • Always be sure that the tool is switched off and unplugged before installing or removing accessories. 1. Straight cuts Steel base type 1. Bolt 2. Fence guide 3. Hex wrench 4. Rip fence (Guide rule) 2.
- Page 10 B-27 when cutting circles or arcs. (For models 4326/4327/4328/4329) ► 1 . Anti-splintering device 2. Aluminum base • Always use Makita type blades No.6, No.7, No.16, No.17, when cutting circles or arcs. (For For splinter-free cuts, the anti-splintering device can models 4326M/4327M) be used.
-
Page 11: Maintenance
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Jig saw blades • Hex wrench 3 •... - Page 12 Makita Corporation 884727C8 20181130 www.makita.com...