Advertisement
To
attach the guide rule (rip fence), use the
hex wrench to loosen the bolt on the base
in front, slip in the guide rule and secure
the bolt.
Using
circular
guide
(optional
accessory)
Use of the circular guide insures clean,
smooth cutting of circles (radius; under
200 mm;
7-7/8")
and arcs.
To attach the circular guide, use the pin,
inserting it in the center hole (arrow) and
secure it with the threaded knob. Then
slide the base of the tool forwards. The
circular guide attaches to the base of the
tool in the same manner as the guide rule
F l i pin
into
(rip fence).
10
Advertisement
