Related Manuals for Makita 4300BA
Summary of Contents for Makita 4300BA
- Page 1 INSTRUCTION MANUAL Jig Saw 4300BA 4300BV 005918 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN and saw blade program, the tool can be used for many Authorized Representative in Europe: purposes and is very well suited for curved or circular Makita International Europe Ltd. cuts. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 ENF002-1... - Page 3 Work area safety 13. Do not overreach. Keep proper footing and Keep work area clean and well lit. Cluttered and balance at all times. This enables better control dark areas invite accidents. of the power tool in unexpected situations. Do not operate power tools in explosive 14.
-
Page 4: Specific Safety Rules
"OFF" position when released. Use clamps or another practical way to secure For Model 4300BA and support the workpiece to a stable platform. 1. Lock button Holding the work by hand or against your body 2. - Page 5 A speed control screw is provided so that maximum tool Installing the universal shank jig saw blade speed can be limited (variable). Turn the speed control 6.35mm screw clockwise for higher speed, and counterclockwise for lower speed. ASSEMBLY CAUTION: Always be sure that the tool is switched off and •...
-
Page 6: Operation
Circular guide (optional accessory) Loosen the bolt on the back of the base with the hex 1. Circular guide wrench. Move the retainer so that the roller contacts the blade lightly. Then tighten the bolt to secure the base and the retainer. However, when using the blade that does not have a straight back, slide the retainer back so that the roller will not contact the blade. -
Page 7: Bevel Cutting
Turn the tool on without the blade making any contact Loosen the bolt on the back of the tool base with the hex and wait until the blade attains full speed. Then rest the wrench, then move the tool base all the way back. base flat on the workpiece and gently move the tool Check the contact between the back edge of the blade forward along the previously marked cutting line. -
Page 8: Replacing Carbon Brushes
MAINTENANCE attachment for its stated purpose. If you need any assistance for more details regarding CAUTION: these accessories, ask your local Makita Service Center. Always be sure that the tool is switched off and Jig saw blades • •... - Page 12 Makita Corporation Anjo, Aichi, Japan 883023A227...