Removing The Defective Memory Module; Installing The New Memory Module; Concluding Steps - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

Main memory
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
"Locating the defective component" on page 45
Ê

10.4.2 Removing the defective memory module

Ê Remove the memory module as described in section
module" on page

10.4.3 Installing the new memory module

Ê Install the memory module as described in section
module" on page

10.4.4 Concluding steps

"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Updating or recovering the system board BIOS and iRMC" on page 70
Ê
"Enabling replaced components in the system BIOS" on page 79
Ê
"Verifying the memory mode" on page 80
Ê
"Enabling SVOM boot watchdog functionality" on page 78
Ê
"Switching on the server" on page 57
Ê
"Enabling BitLocker functionality" on page 84
Ê
210
209.
207.
Upgrade and Maintenance Manual
"Removing a memory
"Installing a memory
RX100 S8