Preliminary Steps; Removing The Standard Power Supply Unit - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

6.4.1

Preliminary steps

"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
6.4.2

Removing the standard power supply unit

Ê Remove the power supply unit as described in section
defective standard power supply unit" on page
Figure 36: Removing the adapter plate
Ê Remove the screw (see circle) which attach the adapter plate of the power
supply unit to the housing.
Ê Push the adapter plate a few centimeters inward to detach it from the two
bolts (see close-ups).
Ê Remove the adapter plate.
RX100 S8
Upgrade and Maintenance Manual
Power supply
"Removing the
93.
107