D-Link SecuriCam DCS-2100+ Manual page 42

Using the DCS-2100+ with an Internet browser
(continued)
Configuration > Advanced > Video (Continued)
Power line frequency
(for fluorescent light)
Maximum frame rate-
Video quality control-
Flip -
Mirror -
White balance -
Click Apply to make
changes effective
Fluorescent lights may intermittently cause a
flashing image depending on the AC power line
frequency. Change the frequency setting to
eliminate a flashing image when the light source is
fluorescent light.
Limits the maximum refresh frame rate. The frame
rate is used with the Video quality control setting
(below) to optimize bandwidth utilization and video
quality.
To fix the bandwidth utilization regardless of the video
quality, choose Fix bit rate and select the desired
bandwidth. The video quality may be reduced in
order to send maximum frames with limited
bandwidth, especially when images change
drastically. For higher video detail regardless of the
bandwidth selection, select Fix quality and select
a video quality level. This setting will utilize more
bandwidth to send the maximum frames when
images change drastically.
Vertically rotate the video.
Horizontally rotate the video. Check both flip and
mirror if the DCS-2100+ is to be installed upside
down.
Choose the suitable option for the best color
temperature.
42