Technical Specifications - D-Link SecuriCam DCS-2100+ Manual

Technical Specifications

Remote management
Camera configuration and Camera system log can be accessed remotely via Internet
Explorer 5.x or above Web browser.
Networking
Protocol
TCP/IP, HTTP, SMTP, FTP, NTP, DNS, DHCP, DDNS, and UPnP
Ethernet
Enhanced 802.11b wireless or 10BaseT or 100BaseT Fast Ethernet auto-negotiation
WLAN
2.4Hhz 802.11b+ DSSS CSMA/CA Protocol
Bit rate: 22/11/5.5/2/1 Mbps
Security: Up to 256-bit WEP
Antenna
2.4Ghz swivel type, monopole
Frequency
2.4Ghz-2.5Ghz
Impedance
50 Ohms nominal
Gain
2dBi typical
Video
Algorithm supported
H.263+ (MPEG-4 Short header mode)
Audio
24Kbps
8K sampling rate
Video resolution
Up to 30 fps at 160x120
Up to 30 fps at 320x240
General I/O
1 opto-isolated sensor input (max. 12VDC 50mA)
1 relay output (max. 24VDC 1A, 125VAC 0.5A)
130