D-Link SecuriCam DCS-2100+ Manual page 11

Software Installation (continued)
The IP Installer will now show a MAC address for the DCS-2100+ and an IP
address. This IP address may not be correct at this step in the installation, until
you see a "Yes" under the
assigned column. The camera is
now automatically configured with
an IP address consistent to the
device it is connected to.
Highlight the MAC address
Click on the Link
After you click on the Link
button, IP Installer will
automatically open your
Internet browser to the IP
Address of the DCS-
2100+, in this example it
is: http://192.168.0.102.
Your DCS-2100+ may
have a different IP Ad-
dress.
button
11