Upgrade The Firmware - NETGEAR WN2000RPT User Manual

CAUTION:
After you click the Erase button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
5. Click the Erase button.
A confirmation pop-up screen displays.
6. Confirm your decision.
The extender resets and restarts. This process takes about one minute.

Upgrade the Firmware

Unless you changed the settings in the Firmware Upgrade screen previously, the extender is
set up to check for new firmware automatically at login.

To check manually for new firmware and, if available, upgrade the firmware:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Maintenance > Firmware Upgrade.
N300 WiFi Range Extender WN2000RPT
Maintain and Monitor the Extender
56