NETGEAR WN2000RPT User Manual page 22

11. Use the default extension name, or, in the 2.4GHz Network Name (SSID) field, enter a new
network name for your extender WiFi network, and click the Continue button.
The extender applies the settings.
12. Wait about two minutes while the extender creates the WiFi network.
13. Use a WiFi network manager on the computer or mobile device to connect to the extender's
newly created WiFi network.
Note: Unless you entered a new network name in
changes its default NETGEAR_EXT network name to the name of the
WiFi network to which you connected the extender and adds _EXT at
the end of the name.
Note: If your computer or mobile device cannot join the new WiFi network of
the extender, see
Error Message
14. Select the My wireless devices are connected to the Extender network check box, and
click the Continue button.
N300 WiFi Range Extender WN2000RPT
You Cannot Join a WiFi Network and Receive an
on page 65.
Get Started
22
Step 11, the extender