Restore The Configuration Settings - NETGEAR WN2000RPT User Manual

Restore the Configuration Settings

You can restore the configuration file of the extender to a previously saved configuration file.
CAUTION:
This process erases any settings that you have configured in the extender.

To restore the extender configuration settings:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select extender Maintenance > Backup Settings.
5. Click the Browse button.
6. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_WN2000RPTv2.cfg.
CAUTION:
After you click the Restore button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
7. Click the Restore button.
A confirmation pop-up screen displays.
8. Confirm your decision.
The extender restarts. This process takes about one minute.
N300 WiFi Range Extender WN2000RPT
Maintain and Monitor the Extender
54