Run The Setup Wizard Again After Initial Setup - NETGEAR WN2000RPT User Manual

If you have not yet personalized your password, type password for the password.
4. Select Advanced > Wireless Settings.
5. Click the Setup Access List button.
6. Select the radio button to the left of the device that you want to remove.
7. Click the Delete button.
The device is removed from the Wireless Card Access List.

Run the Setup Wizard Again After Initial Setup

There might be situations in which you want to run the Setup Wizard again after the initial
setup.

To run the Setup Wizard again:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Setup Wizard.
N300 WiFi Range Extender WN2000RPT
Manage the Extender Network and Security Settings
47