Back Up the Configuration Settings
When the extender works correctly after initial setup, NETGEAR recommends that you back
up the extender configuration settings. After you have backed up the settings, if you have
changed the extender configuration settings but are not content with the new settings, you can
restore the extender configuration to the backed-up settings.
To back up the extender configuration settings:
1.
On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2.
In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.
Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4.
Select extender Maintenance > Backup Settings.
5.
Click the Backup button.
Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_WN2000RPTv2.cfg.
6.
If you do not have your browser set up to save downloaded files automatically, locate where
you want to save the file.
N300 WiFi Range Extender WN2000RPT
Maintain and Monitor the Extender
53