KLN 94 Pilot's Guide
5.4.2.
CREATING A WAYPOINT AT A CERTAIN
LATITUDE/LONGITUDE
It is also possible to create a user-defined waypoint by manually entering
a latitude and longitude. Let's say you wanted to create a user waypoint
over your hypothetical farm at N 42°56.32', W 76°29.95'
To create a user-defined waypoint with latitude/longitude:
1. From any user waypoint (USR)
page, turn on the cursor (B).
It will be over the first character
in the waypoint identifier field
(figure 5-25).
2. Use the right inner knob to
select the first character of the
identifier
Remember that when the cursor
is on, the right inner knob
changes the character and the
right outer knob moves the cur-
sor around.
3. Spell out the rest of the identifier
using the right inner and outer
knobs (figure 5-27).
4. Move the cursor down to the
second line, over User Pos L/L?
(figure 5-28).
5. Press F. The display will
change to a format like figure 5-
29.
6. Use the right inner knob to
select N for north or S for south
(figure 5-30).
(figure
5-26).
Chapter 5 Intermediate Operation
Figure 5-25
Figure 5-26
Figure 5-27
Figure 5-28
Figure 5-29
Figure 5-30
5-11