Honeywell ADEMCO VISTA-15PSIA Installation And Setup Manual page 43

XMIT TO CONFIRM
✱
PRESS TO SKIP
Entd A022-4063
Rcvd A022-4064
YOU MUST
ON
PROGRAM
THIS BUTTON
LOOP 4
ENROLL AS "BR"
5804 Wireless Key Transmitter
For 5804
TEMPLATE 1 Loop
1
2
3
4
TEMPLATE 2 Loop
1
2
3
4
TEMPLATE 3 Loop
1
2
3
4
Confirm
[∗] to continue
•
If "Yes" was entered at the SET TO CONFIRM? prompt previously (see first prompt
following entry into the ∗58 Expert Programming Mode), the display on the left will
appear. Confirm serial and loop numbers by activating the wireless key.
IMPORTANT:
When confirmed, the key is not active for arming/disarming until it is assigned to a user
number (using the assigning attributes command, attribute "4"). See System Operation
section for procedure.
Not Confirmed
[∗] to continue
If the serial number transmitted does not match the serial number entered, a display
similar to the one shown will appear. If the loop number does not match, it will also be
displayed.
If so, activate the button on the wireless key once again. If a match is not obtained (i.e.,
summary display does not appear), press the [#] key and then enter the correct serial
number.
If the serial number transmitted matches the serial number entered, the keypad will beep
3 times and will return you to the Zone Number prompt to enter the starting zone for the
next wireless key.
Or you can return to *58 Menu mode by pressing 00 at the Zone Number prompt.
NOTE: Following the successful enrollment of each wireless device, remove ONE of the
serial number labels from the device and affix it in the appropriate column on the ZONE
PROGRAMMING worksheet of the Programming Form; then enter the other information
(zone number, zone type, loop number, etc.) relevant to that device.
Wireless Key Predefined Default Templates
LOOP 3
OFF
LOOP 2
LOOP 1
These transmitters
are not intended for
use in UL
installations.
5 8 0 4 - 0 0 1 - V 1
Function Zone Type
No Response 23
Disarm 22
Arm Away 21
No Response 23
Function Zone Type
No Response 23
Disarm 22
Arm Away 21
Arm Stay 20
Function Zone Type
24-hour audible 7
Disarm 22
Arm Away 21
Arm Stay 20
Note:
RED/YELLOW
LOOP 3
ENROLL AS "BR"
5804BD 2-Way Wireless Key
For 5804BD
TEMPLATE 4 Loop
1
2
3
4
TEMPLATE 5 Loop
1
2
3
4
TEMPLATE 6 Loop
1
2
3
4
Menu Mode Programming
GREEN/YELLOW
LED
LOOP 2
LOOP 4
LED
(YOU MUST
PROGRAM
THIS BUTTON)
LOOP 1
• •
• •
• •
• • •
• • • •
• •
• •
•
•
Transmitter
Function Zone Type
No Response
No Response
Arm Away
Disarm
Function Zone Type
No Response
Arm Stay
Arm Away
Disarm
Function Zone Type
24-hour audible
Arm Stay
Arm Away
Disarm
5 8 0 4 B D - 0 0 7 - V 0
23
23
21
22
23
20
21
22
7
20
21
22
5-7