Parameter
Function
Channel
Please select a channel first.
Please input pre-record value here.
System can record three to five seconds of video before
Pre-record
activating the record operation in the file. (Depends on data
size.)
Figure 6-30
In
setup interface.
Please set schedule period and then select corresponding
record or snapshot type: schedule motion detection and alarm.
Setup
Please select date (Current setup applies to current day by
default. You can select the circle before the week to apply the
setup to the whole week.)
After setup is complete, please go back to
then click Save to save the current time period setup.
It is a shortcut menu button. You can copy current channel
setup to one or more (all) channels. The interface is shown as
Copy
Figure 6-29
in
You can click Save after you complete setup for one channel, or
Save
you can complete the whole setups and then click Save.
Refresh
Click this button to get device latest configuration information.
RS232
The RS232 interface is shown in
, click Set, and you can go to the corresponding
.
Figure
6-32.
Honeywell
Figure 6-30
and
125