Abnormity - Honeywell HD-DVR-1004 User Manual

Abnormity

Figure 5-26 The Abnormity Setup Menu
Abnormity interface is shown in
•
Event type: There are several options for you such as disk error, no disk
and etc.
•
Alarm output: alarm activation output port (multiple choices). The 3-ch is
controllable 12V output.
•
Delay: you can set corresponding delaying time. The value ranges from
10s-300s. The system automatically delays specified seconds in turning
off the alarm output after the system event is stopped.
•
Show message: the system will send message to local screen to alert
you when alarm occurs.
•
Send email: the system can send out an email to alert you when the
alarm occurs.
Figure 5-27.
Honeywell
87