Label; Position Your Modem Router - NETGEAR N450 User Manual

Label

The label on the modem router shows the router's WiFi network name (SSID), password,
serial number, and MAC address.
WiFi network name (SSID)
Figure 4. Label
For information about the Restore Factory Settings button and the factory setting values, see
Factory Default Settings

Position Your Modem Router

The modem router lets you access your network anywhere within the operating range of your
wireless network. However, the operating distance or range of your wireless connection can
vary significantly depending on the physical placement of your modem router. For example,
the thickness and number of walls the wireless signal passes through can limit the range.
Additionally, other wireless access points in and around your home might affect your modem
router's signal. Wireless access points are modem routers, repeaters, WiFi range extenders,
or any other device that emits a wireless signal for network access.
To position your modem router:

1. Place your modem router near the center of the area where your computers and other
devices operate, and within line of sight to your wireless devices.
2. Make sure that the modem router is within reach of an AC power outlet and near Ethernet
cables for wired computers.
3. Place the modem router in an elevated location, minimizing the number walls and ceilings
between the modem router and your other devices.
4. Place the modem router away from electrical devices such as these:
• Ceiling fans
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
Password (key)
on page 86.
Connecting to the Internet
Serial number
10
MAC address