Table of Contents
Advertisement
Press
ESC
and
through multi-format screens.
2nd
In addition to its other functions, the
assign cameras to the Spot monitors.
• OPERATION :
then press camera button of the camera you want displayed on that
Spot monitor. You can assign any one of the 9 cameras to any of the
four Spot monitors.
This button freezes the video.
• OPERATION :
selected camera. Press
cameras.
This button enters the Zoom Mode.
• OPERATION :
SET
This button has several functions; it brings up a Popup Menu,
sets selections on the OSD menus and decreases numbers in the
number setup function.
• OPERATION :
selected item from on of the menus.
ESC
This button has several functions; it acts as a "Cancel" button,
clears Cameo selections and increases numbers in the number setup
function.
• OPERATION :
decrease the number.
The Up, Down, Left and Right buttons are used whenever
you need to move the cursor, highlight bar or Cameo window.
• OPERATION :
want to move.
1
to
9
These buttons are used to make camera selections or enter
numbers as needed.
to start Stack Sequence which sequences
Press
2nd
then 1, 2, 3 or 4 to select the Spot monitor;
Press
to freeze the video from the currently
ESC
then
Press
to enter the Zoom Mode.
Press
SET
to enter the Popup Menu or to set a
Press
ESC
to cancel entries, clear the Cameo or to
Press the arrow corresponding to the direction you
55
2nd
button can be used to
to freeze the video from all the
Advertisement
Table of Contents
