Table of Contents
Advertisement
Motion Detection Index Setup
< Figure 26 > Motion Detection Index Setup screen.
Normally, the multiplexer gives equal priority to all cameras (1 to 9) for
motion detection. However, it is possible to change the priorities.
• + :
Increases the camera number by one.
• - :
Decreases the camera number by one.
• < :
Scrolls through the camera array to the left.
• > :
Scrolls through the camera array to the right.
• Delete :
Deletes the highlighted camera from the array.
• Insert :
Inserts a blank into the array.
• End :
Enters an "E" which sets the end mark for the index list.
• View :
Displays the Motion Detection Index List.
• Exit :
Saves your changes and returns to the previous menu.
33
Advertisement
Table of Contents
