Chapter 2 Installation; Required Tools; Connecting Cameras; Figure 2 - Multiplexer Connections - Honeywell HXMT9 / HXMT9X Installation Manual

Required Tools

Although no special tools are required to install the multiplexer, it is only
one part of a complex system. Refer to the Installation manuals for the
other components in your particular installation for special tool
requirements.
Up to 9
Cameras

Connecting Cameras

You can connect up to 9 cameras to the
camera BNCs to the IN BNC connectors (top row). The loop-through
connectors (OUT) are auto-terminated, so terminating resisters are not
needed if you do not loop video out to another device.
NOTE : Connecting a cable to the loop-through connector switches off
the termination. Do NOT connect a cable to the loop-through BNC
connectors unless it is connected to the input of another video device.
Chapter 2
Installation
< Figure 2 > multiplexer
5
connections.
multiplexer . Connect the
Up to 9
Sensors or
Contacts