Installation - Honeywell F115 Product Data

F114 AND F115 CEILING SURFACE MOUNTED MEDIA AIR CLEANERS
IMPORTANT
When selecting a location, make sure the air
cleaner is secured to ceiling load-bearing supports
or joists. If installing on a T-grid drop ceiling, secure
the air cleaner to the true ceiling.

INSTALLATION

When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
68-0201-2 Revised 11-07
MEDIA AIR
CLEANER
1 DISCHARGE AIR FLOW IN ANY DIRECTION IS ACCEPTABLE.
Fig. 3. Choose location for air cleaners.
Mount and Wire the Air Cleaner r r r r
4
1
AIR SPACE
TO BE
CLEANED
CAUTION
Electrical Shock Hazard.
Power source can shock.
• Do not connect the power source until after the air
cleaner is mounted. This will prevent electrical
shock or equipment damage.
• Be sure to turn off the air cleaner before servicing
it.
• If the air cleaner must be turned on for an
electrical check, be extremely cautious.
• Be cautious when working near the moving parts
of the air cleaner.
CAUTION
Eye Exposure.
Harmful dust can obstruct or injure unshielded
eyes.
A CPZ™ module usually releases dust when it is
handled.
Always wear safety glasses when installing or
removing CPZ™ canisters.
M11694