Honda H5013 Owner's Manual page 91

11. Wheel removal
Do not attempt to remove a wheel unless the tractor is on firm level
ground.
Do not attempt to remove or replace a tire unless you have the equipment
and knowledge to do so properly.
1. Apply the parking brake and put the transmission in gear.
2. Block the wheels securely and loosen the lug nuts counterclockwise
one turn.
3. Place a jack under the jack point nearest the wheel you are removing
and raise the wheel off the ground.
4. Remove the nuts and wheel.
5. Install the wheel and hand-tighten reinstall the
nuts.
6. Lower the tractor, remove the jack, and then tighten the nuts a little at a
time in an "X" pattern.
Specified torque: 13 kg-m (94 ft-lb)
(JACK POINTS]
FRONT
REAR
\
89